America Makes Announces MMX 2019

October 21, 2019 | Categories: America Makes News

Deloitte and SME Are Diamond Sponsors of the Institute’s Premier Annual Event

Youngstown, Ohio — October 21, 2019. America Makes proudly announces that it will convene its annual, two-day Members Meeting and Exchange (MMX) this week, October 22 – 23, 2019, at the Henry H. Stambaugh Auditorium ballroom in Youngstown. The Institute’s Platinum-level member, Deloitte Consulting, LLC, and Gold-level member, SME are MMX Diamond Sponsors.

Each year, America Makes hosts its MMX event to bring its growing additive community together in Youngstown to impart the latest information on the Institute; report on and review technical content as it relates to additive manufacturing (AM) research projects; and provide an opportunity for members to network and collaborate.

Driven by the National Center for Defense Manufacturing and Machining (NCDMM), America Makes is the nation’s leading and collaborative partner in AM technology research, discovery, creation, and innovation. It is the first of eight Manufacturing Innovation Institutes established and managed by the U.S. Department of Defense as public-private partnerships. America Makes is also a member of the Manufacturing USA® network, which seeks to secure U.S. global leadership in advanced manufacturing.

“We’re excited to have senior-level representatives from the Department of Defense’s Joint Additive Manufacturing Steering Group (JAMSG), the Department of Energy, the Federal Aviation Administration, and other military services at MMX to present their challenges and opportunities in AM,” said America Makes Executive Director John Wilczynski. “The value of this year’s speaker lineup is tremendous.”

America Makes has planned a strong and dynamic MMX speaker lineup for the two-day event, most notably, Alan C. Pentz, Ph.D., Additive Manufacturing Implementation Lead, Deputy Assistant Secretary of the Navy – Research, Development, Test & Evaluation (RDT&E) and Major General William T. Cooley, Commander, Air Force Research Laboratory (AFRL), Wright-Patterson Air Force Base, Ohio.

Dr. Pentz will share JAMSG insight with MMX attendees. He has more than 20 years of experience evaluating gas turbine engine designs, propulsion technical risk, and structural life management issues across the U.S. Navy and the U.S. Marine Corps aircraft inventory. He also leads NAVAIR’s Propulsion and Power Department efforts to establish structural policies and qualification guidelines for such advanced disruptive technologies as AM and ceramic matrix composites.

Maj. Gen. Cooley will focus his remarks on AFRL’s 2030 goals, specifically how manufacturing collaborations and AM are vital to achieving those objectives. America Makes is managed by AFRL under the DoD Manufacturing Technology (ManTech) program through the Defense-wide Manufacturing Science and Technology Program—OSD, Manufacturing and Industrial Base Policy. Maj. Gen. Cooley is responsible for managing a $2.5 billion U.S. Air Force science and technology program and an additional $2.3 billion in externally funded research and development. He is also responsible for leading a government workforce of approximately 6,000 people in the laboratory’s nine component technology directorates and the 711th Human Performance Wing.

Other MMX 2019 speakers include:

  • Brent Brunell, Senior Executive – Additive Technology Leader, GE Research
  • Michael Gorelik, Ph.D., Chief Scientist and Technical Advisor for Fatigue and Damage Tolerance, Federal Aviation Administration
  • Blake Marshall, Technology Manager, Advanced Manufacturing Office, Department of Energy
  • Nelson K. Williams, Ph.D., Chief, Sustainment Maintenance Division, U.S. Army
  • Jennifer Wolk, Ph.D., Program Officer, Office of Naval Research

“I also want to recognize Deloitte and SME for their Diamond-level sponsorships, as well as all our other MMX sponsors,” added Mr. Wilczynski. “Their continued support of the America Makes mission and our community is very much appreciated.”

MMX is also sponsored by:

Tier I Sponsors: Humtown® Products and OpenAdditive™, a Universal Technology Corporation company

Tier II Sponsors: ASTM International and The Barnes Group Advisors LLC

Tier III Sponsors: AddUp, ASME, Catalyst Connection, and Bluestreak | Bright AM™

Tier IV Sponsors: The Technology House, AMT—The Association for Manufacturing Technology and NSL Analytical Services, Inc.

Media Sponsors: Digital Engineering and The TCT Group

Reception Sponsor: Juggerbot3D

On Tuesday, October 22nd, MMX will commence at 8:00 a.m. with opening remarks to be made by America Makes Executive Director John Wilczynski followed by remarks from Dr. Alan Pentz.

David Storer, Manager of Real Estate Development for Allegheny County Airport Authority (ACAA), will make a special announcement about the Pittsburgh Airport Innovation Campus.

Based on direct feedback that America Makes received from its member community, MMX 2019 will feature several moderated, panel discussions. These panel discussion will focus on areas of particular interest to the membership community, including small business engagement challenges, the America Makes Satellite Center model, Women in 3D Printing, and additive standards.

America Makes will also announce on Tuesday the awardees of its Distinguished Collaborator Award, as well as the Class of 2019 America Makes Ambassadors. Established in 2014, the America Makes Distinguished Collaborator Award recognizes an individual or a group of individuals with exceptional commitment and dedication to the advancement of AM technology, practices, and innovation in the manufacturing industry. Launched in 2017, the Ambassador Program recognizes and appreciates individuals who continually demonstrate outstanding dedication to America Makes and its mission.

Tuesday will conclude with a networking reception at the Youngstown Historical Center of Industry and Labor. Owned by the Ohio Historical Society and operated by America Makes Platinum-level member Youngstown State University, the Youngstown Historical Center of Industry & Labor preserves the history of the steel industry that dominated the Youngstown area’s economic life for much of the 20th century.

On Wednesday, October 23rd, Bill Walch, NCDMM Program Manager, will report out on AMNOW, a program to support AM technology insertion into the existing U.S. Army supply chain. The AMNOW program launched in April 2019 with the award of the initial phase, which was secured jointly by NCDMM in partnership with Catalyst Connection.

Maj. Gen. Cooley, Commander of AFRL will then address MMX attendees.

Later in the day, NCDMM’s Scott Crynock, Senior Project Engineer and Joe Veranese, Corporate Services Director will present on the America Makes Technology Roadmap and Digital Storefront refresh efforts.

America Makes will share technical status reports given by principal investigators for six ongoing projects. The presentation format is intended to be flexible and conversational in its structure to permit more organic interaction throughout each presentation so that ideas are exchanged, best practices are discussed, and projects are understood by the attending membership community at a richer, deeper level.

Optional MMX Activities

Also available to MMX attendees are some optional, MMX-related activities scheduled on Monday, October 21st and Thursday, October 24th.

Juggerbot3D from 1:00 p.m. to 5:00 p.m. on Monday is opening its doors to MMX attendees for tours of its facility. MMX attendees are invited to join Juggerbot3D as they prepare for the launch of their next-generation, industrial-grade printers: large-format machines boasting state-of-the-art pellet and filament extrusion technologies. Come see what is in store for 2020, including a development platform for production applications and the first additive machine capable of printing both thermoplastics and thermosets. This event is free, but registration is required.

Also on Monday from 3:00 p.m. to 5:00 p.m., the America Makes Maintenance and Sustainment Advisory Group will be hosting tours of the Youngstown Business Incubator’s newest advanced manufacturing building, Tech Block Building 5 (TBB5). YBI’s TBB5 is a 58,000 sq. ft. manufacturing facility that houses new innovative startups in the AM space, as well as advanced manufacturing equipment. Learn about the AM ecosystem that is happening in Youngstown and see a Xjet Carmel 1400 ceramic printer, one of only three in the U.S. Contact YBI’s Stephanie Gaffney at if you would like to attend.

A MMX Welcoming Reception, sponsored by Juggerbot3D, will be held from 5:00 p.m. to 8:00 p.m. at the Whistle & Keg, self-service craft beer and wine bar, at 101 W. Federal Street in Youngstown.

As Monday draws to a close, the next Women in 3D Printing Meet Up will be held from 7:00 p.m. to 10:00 p.m. at V2 Wine Bar and Trattoria by Vernon at 100 W. Federal Street. Registration through Women in 3D Printing is required.

On Thursday, October 24th, a Design for AM (DfAM) Course for Managers and Executives will be offered by Wohlers Associate. This special one-day course is designed for those wanting to better understand the most important and relevant DfAM strategies, opportunities, and challenges. Wohlers Associates instructors are Terry Wohlers, Principal Consultant & President, and Ray Huff, Associate Engineer & Instructor. This DfAM course is being offered with support from the Additive Manufacturing Cluster of OH. Registration through Wohlers Associates is required for this course.

Visit for more information about America Makes, the MMX event, or on becoming a member. Follow us on Twitter @AmericaMakes.


About America Makes

Driven by the National Center for Defense Manufacturing and Machining (NCDMM), America Makes is the National Additive Manufacturing Innovation Institute. As the national accelerator for additive manufacturing (AM) based in Youngstown, Ohio, America Makes is the nation’s leading and collaborative partner in AM and 3DP technology research, discovery, creation, and innovation. Comprised of member organizations from industry, academia, government, non-government agencies, and workforce and economic development resources, the America Makes membership community is working together to innovate and accelerate AM to increase our nation’s global manufacturing competitiveness. America Makes is the first of eight Manufacturing Innovation Institutes established and managed by the U.S. Department of Defense as public-private partnerships. America Makes is also a member of the Manufacturing USA® network, which seeks to secure U.S. global leadership in advanced manufacturing. For more information about America Makes, visit and follow @AmericaMakes on Twitter.


NCDMM delivers innovative and collaborative manufacturing solutions that enhance our nation’s workforce and economic competitiveness. NCDMM has extensive knowledge and depth in manufacturing areas—both commercial and defense—to continually innovate, improve, and advance manufacturing technologies and methodologies. Our experienced team specializes in identifying the needs, the players, the technologies, and processes to attain optimal solutions for our customers. We connect the dots. That’s the NCDMM methodology. NCDMM also manages the national accelerator for additive manufacturing (AM) and 3D printing (3DP), America Makes—the National Additive Manufacturing Innovation Institute. For additional information, visit the NCDMM at and follow @NCDMMnews on Twitter.