Portfolio Status: Completed Projects

4034 Refining Microstructure of AM Materials to Improve Non-Destructive Inspection (NDI)

June 23, 2017

This project is directed to the implementation of EB-DED additive manufacturing for structural components on the F-35 for Lockheed Martin and Sciaky Inc. by defining process changes to refine the...

Read More

4035 Optimization of Parallel Consolidation Method for Industrial AM

June 23, 2017

The objective of this project is the development of a next generation 3D printing method by consolidating powder at many points on a part simultaneously. This project seeks to develop the...

Read More

4037 AM Laser Powder Feed Repair (Reborn)

July 12, 2017

The goal of this project was to facilitate the adoption of AM for flight-worthy repairs by restoring the Ti-6Al-4V component function without compromising structural integrity. Restoration of the...

Read More

4038 Support of AM Mission by CIMP-3D

July 12, 2017

The objectives of this project were to bridge the gap between applied research and mature product development, to provide shared assets for the nation’s industrial base, to further the adoption...

Read More

4039 Development & Demonstration of Open-Source Protocols for Powder Bed Fusion AM

June 22, 2017

The objective of the program was to develop protocol and programs that would take any STL file as input and generate a machine-independent protocol for manufacturing the part on a PBFAM system....

Read More

4040 Development & Demonstration of an Open layered Protocol for Powder Bed AM

June 22, 2017

The objective of this project was to develop and demonstrate an open, layered protocol for PBFAM in collaboration with commercial OEMs and a commercial PBFAM systems manufacturer.

The...

Read More

4042 Closed Loop Process Control for Powder Bed Fusion of Thermoplastics

June 23, 2017

The objective of this project was to examine the potential of more comprehensive feedback control in PBF machines. The University of Texas at Austin (UT) teamed with Harvest Technologies, which...

Read More

4043 Non-Destructive Evaluation of Complex Metallic AM Structures

June 23, 2017

The objective of this project is to assess X-ray computed tomography (CT) performance in detection and sizing of typical flaws and nonconformances in titanium- and nickelbased alloys produced...

Read More

4046 AM of Heat Exchanges for Propulsion Applications

June 23, 2017

The objective of this program is to develop unique powder bed fusion additive manufacturing (PBFAM) designs for heat exchangers that would not be possible or cost-effective using conventional...

Read More

4047 Parametric Design of Functional Support Structures for Metal Alloy Feedstocks

June 23, 2017

The goal of this project is to codify the design rules of experienced additive manufacturing (AM) design/manufacturing engineers and use those rules within the software to automatically generate...

Read More

4048 Multidisciplinary Design Analysis for Seamless AM Design, Analysis, Build, & Redesign Workflows

June 15, 2017

The objective of this project was to address the development of a methodology to create Design For Manufacturability (DFM) criteria and rules for advanced design features. Additionally, the...

Read More

4049 Economic Production of Next Generation Orthopedic Materials through Powder Reuse in AM

June 23, 2017

The objective of this program was to provide a substantial reduction in material costs for orthopedic applications involved in AM part production by decreasing the amount of discarded powder. The...

Read More

1 9 10 11 12 13