America Makes and ANSI Announce Interactive Portal to Track Standardization Activity to Support Additive Manufacturing

October 22, 2019 | Categories: America Makes News

Portal Provides Updates on Gaps Identified in the Standardization Roadmap for Additive Manufacturing (Version 2.0)

Youngstown, OH and New York, October 22, 2019: America Makes and the American National Standards Institute (ANSI) today announced the release of an online, interactive portal to track activity by the standardization community to address the gaps identified in the Standardization Roadmap for Additive Manufacturing (Version 2.0) published in June 2018 by the America Makes & ANSI Additive Manufacturing Standardization Collaborative (AMSC). The portal, accessible to all interested stakeholders, will be regularly updated based on input from AMSC members, particularly standards developing organizations. The sections of the portal correspond to the roadmap sections: design; precursor materials; process control; post-processing; finished material properties; qualification and certification; nondestructive evaluation; and maintenance and repair.

“The new online portal will help to make the AMSC roadmap a ‘living document’ that keeps additive manufacturing stakeholders informed on the latest standards development activities,” said America Makes Executive Director John Wilczynski.

“ANSI is always looking for ways to deliver added value to the community, and the AMSC portal provides users an easy way to check on the status of work to develop additive manufacturing standards,” said ANSI President & CEO S. Joe Bhatia.

The AMSC was launched in 2016 as a cross-sector coordinating body whose purpose is to accelerate the development of industry-wide additive manufacturing standards and specifications consistent with stakeholder needs. Supported by input from standards developing organizations that are engaged in various aspects of additive manufacturing, the collaborative aims to coordinate and maintain a consistent, harmonized, and non-contradictory set of additive manufacturing standards. The AMSC does not develop standards but, rather, helps to drive coordinated standards development activity with the ultimate goal of helping to grow of the additive manufacturing industry.

With contributions from more than 300 individuals from 175 public- and private-sector organizations, the Standardization Roadmap for Additive Manufacturing identifies published standards, those being developed, and those that are needed. The document describes 93 gaps where no published standard or specification currently exists to respond to a particular industry need. Many of these gaps also identify additional pre-standardization research and development (R&D) needs. All 93 of the roadmap gaps are included in the online portal with updates for those where such information has been provided.

For more information, visit

About America Makes

Driven by the National Center for Defense Manufacturing and Machining (NCDMM), America Makes is the National Additive Manufacturing Innovation Institute. As the national accelerator for additive manufacturing (AM) based in Youngstown, Ohio, America Makes is the nation’s leading and collaborative partner in AM and 3DP technology research, discovery, creation, and innovation. Comprised of member organizations from industry, academia, government, non-government agencies, and workforce and economic development resources, the America Makes membership community is working together to innovate and accelerate AM to increase our nation’s global manufacturing competitiveness. America Makes is the first of eight Manufacturing Innovation Institutes established and managed by the U.S. Department of Defense as public-private partnerships. America Makes is also a member of the Manufacturing USA® network, which seeks to secure U.S. global leadership in advanced manufacturing. For more information about America Makes, visit and follow @AmericaMakes on Twitter.

NCDMM delivers innovative and collaborative manufacturing solutions that enhance our nation’s workforce and economic competitiveness. NCDMM has extensive knowledge and depth in manufacturing areas – both commercial and defense – to continually innovate, improve, and advance manufacturing technologies and methodologies. Our experienced team specializes in identifying the needs, the players, the technologies, and the processes to attain optimal solutions for our customers. We connect the dots. That’s the NCDMM methodology. NCDMM also manages the national accelerator for additive manufacturing (AM) and 3D printing (3DP), America Makes – the National Additive Manufacturing Innovation Institute. For more information, visit

About ANSI
The American National Standards Institute (ANSI) is a private non-profit organization whose mission is to enhance U.S. global competitiveness and the American quality of life by promoting, facilitating, and safeguarding the integrity of the voluntary standardization and conformity assessment system. Its membership is made up of businesses, professional societies and trade associations, standards developers, government agencies, and consumer and labor organizations. ANSI represents and serves the diverse interests of more than 270,000 companies and organizations and 30 million professionals worldwide. The Institute is the official U.S. representative to the International Organization for Standardization (ISO) and, via the U.S. National Committee, the International Electrotechnical Commission (IEC). For more information, visit


Media Contacts:
America Makes
Scott Deutsch

Jana Zabinski